The Voliro T is a unique non-destructive testing (NDT) drone with omnidirectional flight capabilities and tiltable rotors, enabling precise and stable inspections in complex industrial environments.
Equipment Type: Drone
Request a Quote
The Voliro T drone’s unprecedented autonomy, omnidirectional functionality, and advanced physical interaction capabilities make it a revolutionary tool for performing ultrasonic non-destructive testing in hard-to-reach environments.
The Voliro T drone includes an NDT payload bundle featuring an electromagnetic acoustic transducer (EMAT), ultrasonic transducer, and a dry film thickness sensor for precise wall thickness measurements and surface corrosion detection.
Use a maximum force of 30N and apply various Nm of torque to structures. Engage in physical interaction with objects.
Experience unparalleled mobility with the Voliro T’s ability to tilt up to +-90°, enabling interaction in any orientation.
Implementing thrust-vectoring and 6DoF control ensures the necessary stability of teh Voliro T for dependable interaction even in challenging conditions.
With the its semi-autonomous flight modes and advanced pilot assistance, the Voliro T offers a safe and user-friendly flying experience, even in GPS-denied environments, allowing for close proximity flights near structures.
Designed to communicate with humans and machines, the Voliro T is equipped with open interfaces that enable seamless integration.
The Voliro T supports a range of custom payloads weighing up to 1kg and effective solutions for your challenges.
Additionally, the Voliro T is equipped with integrated sensors, including two 4k cameras and a depth camera.
Experience convenience and effortless portability with the Voliro T drone. Not only does the Voliro T come with a rugged, waterproof, crushproof transportation case, payload box, and accessories box, but the batteries are airline approved in accordance with the IATA TABLE 2.3.A, allowing you to pack them in your carry-on luggage conveniently for drone inspections.
The EMAT is ideal for corroded and dirty surfaces, this sensor has a maximal lift-off of 4mm. It complies with ASTM E1816-18 standards and has a range of 2-150mm with an accuracy of 0.04mm.
The ultrasonic transducer is compliant with EN 12668-1 and ISO 16831:2012.
This sensor offers echo-to-echo and pulsed echo test modes with live A-Scan. It has a thickness range of 4-150mm and a resolution of 0.02us (or 0.06mm at 5900m/s).
The DFT sensor measures the thickness of protective coatings. It uses magnetic induction and eddy current measurement modes, with a range of 0 to 1500um (or 700um).
The needle probe on the LPS tester ensures a reliable electrical connection with the lightning receptors, even in the presence of oxidation. The angular-compliant probe is designed to apply a consistent force of 30 N.
Relative pulsed eddy current wall thickness measurement system, optimized for aluminum jackets and low-carbon steel components. Supports a maximum lift-off distance of 100 mm and measures wall thickness in low-carbon steel within a range of 3 to 18 mm.
Technical Specifications
Drone Type / Configuration | Multirotor / Omnidirectional Tri-Copter |
Weight Batteries Included | 3.7 kg |
Max Takeoff Weight | 6.0 kg |
Max Payload Weight | 1,0 kg |
Dimensions (LxBxH) | 78 x 78 x 34 cm without rotors, bumpers, and payload) 118 x 109 x 34 cm rotor tip to payload tip |
Camera System | 4K 12MP Inspector Camera (Horizontal FoV 80°) 4K 12MP Pilot Camera (Horizontal FoV 140°) Frame rate: 30/60fps best GSD: 0.16mm/px Video Formats: H.265(.mp4) File Storage: microSD, 256GB |
Downlink | Live Video Stream Inspector Camera: HD 30fps Live Video Stream Pilot Camera: HD 30fps Live Payload Data Stream |
Power LEDs | max. 17'000 lumen adjustable through Remote Control |
Sensing System | Depth Camera (VGA) 6 x LiDAR distance sensor 6 x Vision-based velocity sensor RTK GPS |
Battery Type | LiPo (Hardcase, UN3481) |
Battery Configuration | 2 x 6S batteries in parallel |
Energy | 99Wh |
Capacity | 2 x 4500 mAh |
Weight | 1.3 kg per pair of batteries |
Charging Cutoff Voltage | 25.2 V |
Min Voltage | 21.6 V no load |
Recommended Storage Voltage | 22.2 - 22.8 V |
Recommended Charging Current | < 9 A or 1C |
Charging Temperature | 10 - 30°C |
Charging Time | < 90 min |
Smart Battery | No, batteries must be treated and cared for accordingly |
Transportation | Batteries airline approved according to IATA TABLE 2.3.A batteries have to be carried within carry-on baggage |
Charge Type | Dual AC/DC LiPo charger with balancing function |
Charger Input Voltage AC | 110 - 120V AC / 220 - 240 V AC (manual switch), 50 / 60Hz 9 - 32 V DC |
Peak Output Power | 600 W |
Flight Time | 10 - 14 min. mission and payload dependent |
Flight Modes | Manual attitude is fully stabilized Altitude Position Interaction Assistant |
Emergency Flight Modes | Intelligent auto-descent / position-hold on signal lost |
Navigation Assistance | Outdoor GPS based: position, velocity, altitude Indoor GPS denied: height, velocity, altitude |
Interaction Accuracy | ± 2 cm normal environment conditions |
Max Horizontal Speed | 3 m/s in position flight mode 15 m/s in altitude and manual flight mode |
Max Ascent / Descent Speed | 3 m/s in position and altitude flight mode |
Pilot Tablet Included | Samsung Galaxy Tab S6 Lite |
Tablet Charger | Data Link, 12v |
Tablet Battery | 7040 mAh |
Inspector Tablet Included | Same as Pilot Tablet |
Remote Controller Mode | Mode 2 (Throttle and yaw on left stick) |
Gimbal | Hall sensor M7 gimbal pinching thumbs compatible |
Remote Controller Battery | 3600 mAh |
Remote Controller Charger | Input 110 - 24v AC, Output 12.8v DC |
GPS Antenna | Integrated active antenna |
Tripod | Rollei Compact Traveler Star S1, 38.5 - 125cm |
Battery | 3000 mAh |
Charger | Input 110 - 240v AC, Output 12.8v DC |
© MFE Inspection Solutions Inc. 2024