Tinker & Rasor holiday detectors can be configured with a variety of accessories to support different coating inspection applications.
From connectors and extension wands to grounding components and wet sponge testing supplies, the right accessories help inspectors adapt their equipment to specific inspection requirements.
Keep reading to see all the Tinker & Rasor holiday accessories we offer.
Equipment Type: Holiday Detector Accessories
How can we help?
The accessories below support common holiday detector setups, including spring electrode assemblies, brush electrode assemblies, wand configurations, grounding, wet sponge testing, and equipment transport.
The Spring Connector is a compax connector used with compatible spring electrode assemblies to support holiday detector inspections on coated assets.
It helps inspectors configure spring electrode setups for specific inspection requirements.
This accessory is commonly used for:
Spring Electrode Couplings are used to connect compatible spring electrode components.
They help inspectors create inspection configurations that match the size and geometry of the asset being tested.
This accessory is commonly used for:
The Brush Electrode Connector is designed for use with compatible brush electrode assemblies.
It supports inspection configurations where brush-style electrodes are required.
This accessory is commonly used for:
The AP/W Wand is designed for use with compatible Tinker & Rasor holiday detection systems.
It helps inspectors position electrodes during coating inspections.
This accessory is commonly used for:
The 18-inch Extension Wand provides additional reach during holiday detector inspections.
It can help inspectors access difficult-to-reach inspection areas.
This accessory is commonly used for:
The 25-foot Ground Cable supports proper detector grounding during holiday inspections. Reliable grounding helps maintain consistent detector performance.
This accessory is commonly used for:
Water Wetter is used with wet sponge holiday detection systems to help maintain conductivity during inspections. It’s commonly used with Tinker & Rasor M/1 and M1/AC holiday detectors.
This accessory is commonly used for:
The Canvas Carrying Bag helps inspectors store and transport holiday detection equipment and accessories between projects.
This accessory is commonly used for:
Different inspection tasks often require different accessory configurations.
The chart below provides a simple starting point for matching common inspection needs with the accessories listed above.
| Inspection Need | Recommended Accessory |
|---|---|
| Extend inspection reach | 18″ Extension Wand |
| Replace or extend grounding components | 25′ Ground Cable |
| Configure spring electrode assemblies | Spring Connector and Spring Electrode Couplings |
| Configure brush electrode assemblies | Brush Electrode Connector |
| Perform wet sponge testing | Water Wetter Wetting Solution |
| Transport equipment between job sites | Canvas Carrying Bag |
English English 
English (Canada)
Français du Canada
