TSI Q-Trak XP Indoor Air Quality IAQ Monitor 7585
Think of the TSI Q-Trak XP Indoor Air Quality IAQ Monitor 7585 as the Swiss Army Knife of indoor air quality tools—compact, powerful, and ready for just about anything. Whether you’re checking for pollutants in an office building, assessing air quality in a hospital, or conducting a detailed investigation in a manufacturing facility, this handheld device makes it easy to get a full picture of what’s in the air.
The Q-Trak XP delivers real-time insight across a broad range of indoor conditions, replacing the need for multiple specialized instruments. Its flexible sensor options and simple touchscreen interface keep workflows efficient and responsive.
The Q-Trak XP IAQ Monitor is built for professionals who need fast, reliable answers—without lugging around multiple instruments. Perfect for indoor air quality surveys, industrial hygiene assessments, and proactive monitoring, the Q-Trak XP delivers serious insight in a single, easy-to-use device.
Equipment Type: Toxic Air Monitoring
Demande de devis
When indoor air quality issues arise, you need more than just data, you need answers. The Q-Trak XP Indoor Air Quality Monitor 7585 is trusted by professionals to deliver precise, actionable information in real time.
Whether you’re verifying ventilation effectiveness, identifying sources of discomfort, or validating a remediation plan, it turns complex indoor air quality challenges into clear, manageable solutions.
With the Q-Trak XP, you’re not limited to just one or two readings, you’re capturing a comprehensive set of up to 20 environmental parameters in one pass—from particles and gases to temperature, humidity, and pressure.
Its modular sensor system makes it easy to adapt the instrument to the specific pollutants or conditions of each job.
No downtime, no recalibration headaches, just seamless flexibility in the field, tailored to whatever pollutants or conditions you’re up against.
Carrying out detailed air quality assessments doesn’t have to mean complicated tools. The Q-Trak XP features a large, intuitive touchscreen that makes navigation simple, even with gloves on.
Its lightweight, handheld design allows you to move easily through buildings, facilities, or job sites without fatigue.
Whether you’re conducting spot checks or long-shift monitoring, it offers the comfort and usability you need to stay focused on the work, not the equipment.
No two air quality investigations are exactly alike, which is why the Q-Trak XP supports a wide range of swappable gas sensors. Choose the combination that fits your application, from CO2 and formaldehyde to ozone and VOCs.
Each sensor is pre-calibrated and field replaceable, and for added flexibility, the entire multi-sensor module can be swapped out as a single unit. This design makes it easy to reconfigure or refresh the instrument without delays, keeping downtime low and productivity high.
Every sensor and module includes a calibration certificate, giving you confidence in your measurements from start to finish.
The Q-Trak XP is built for more than just quick spot checks. Its rechargeable lithium-ion battery supports all-day use in the field, and a universal AC adapter is included when continuous power is needed.
With storage capacity for over 73 million data points, it’s ideal for long-term monitoring and large-scale assessments without frequent data offloading.
When accuracy is critical, built-in support for field calibration ensures each sensor is ready before the job begins. You can verify performance on-site, maintain compliance, and trust the data you’re collecting—every step of the way.
The Q-Trak XP is designed to simplify complex IAQ investigations from the start. Its built-in workflow for calculating percent outdoor air makes ventilation assessments faster and more consistent, reducing manual steps and improving reporting accuracy.
Every kit includes the essentials: the handheld unit, pre-installed sensors for key parameters, a CO2 gas sensor, rechargeable battery, calibration cap, carrying case, TrakPro Ultra software, and more. It’s a complete, ready-to-deploy solution straight out of the box.
Get the Q-Trak XP from MFE Inspection Solutions today. Whether you need it for a single project or ongoing monitoring, MFE offers flexible rental and purchase options to meet your needs.
Please note: This instrument is not designed for confined spaces where respirators may be required, or for use in hazardous or explosive environments.
| Type de capteur | Optical Particle Counter (OPC) |
| Particulate Mass (PM) | PM1.0, PM2.5, PM10 |
| Gamme | 0 to 500 µg/m3 |
| Précision | ±10 μg/m3 (0 - 100 μg/m3), ±10% of reading 100 - 500 μg/m³ |
| PM Resolution | 1 µg/m3, 0.001 mg/m3 |
| PM Units | µg/m3, mg/m3 |
| (PC sizes in microns (µm)) | PC0.3, PC0.5, PC1.0, PC2.5, PC5.0, PC10.0 |
| PC Resolution | 0.01/cm3, 1/ft3, 1/L |
| PC Units | #/cm3, #/ft3, #/L |
| Response Time | <10 seconds |
| Type de capteur | Nondispersive Infrared (NDIR) |
| Gamme | 0 - 5000 ppm |
| Précision | ± 50 ppm |
| Résolution | 1 ppm |
| Response Time (t90) | < 40s @ 20° C ambient |
| Gamme | 32 - 140°F (0 - 60° C) |
| Précision | ± 1.0°F (0.5° C) |
| Résolution | 0.1°F (0.1° C) |
| Response Time (t90) | < 15 seconds to 90% of final value |
| Type de capteur | Capacitance |
| Gamme | 0 - 100% RH |
| Précision | ± 3% RH |
| Résolution | 0.1 % RH |
| Response Time (t63) | 8 Seconds to 63% of final value |
| Gamme | 7.7 - 37.2 in Hg (196.0 - 945.0 mm Hg) |
| Précision | ±0.12 in Hg (±3.0 mm Hg) |
| Résolution | 0.01 in Hg (0.1 mm Hg) |
| Response Time (t63) | >2 seconds to 63% of final value |
| Logging Capability | 73,000,000 data points |
| Température de fonctionnement | 41 - 104° F (5 - 40° C) |
| Température de stockage | -4 - 140° F (-20 - 60° C) |
| Meter Dimensions | 3.8 in. × 8.3 in. × 2.1 in. |
| Weight with Batteries | 1.2 lbs./0.55 kg |
| Exigences en matière d'alimentation | Li-ion rechargeable battery pack or universal AC adapter - both included |
| Languages Supported | English, German, French |
| Type de capteur | Electrochemical |
| Gamme | 0-400 ppm |
| Précision | ± 2% of reading ± 1 ppm |
| Résolution | 0.1 ppm |
| Response Time (t90) | < 30 seconds from zero to 10ppm |
| Type de capteur | PID (Photo Ionization Detector) |
| Gamme | 0-2000 ppm |
| Résolution | 0.1 ppm |
| Response Time (t90) | <3 seconds |
| Type de capteur | Electrochemical |
| Gamme | 0-20 ppm |
| Précision | ± 0.3 ppm |
| Résolution | 0.01 ppm |
| Response Time (t90) | < 80 seconds from zero to 1ppm |
English English 
English (Canada)
Français du Canada
