The GE DMS 2 provides advanced ultrasonic thickness measurement with dual-element transducers, offering accurate corrosion monitoring and high-resolution B-scan imaging.
Equipment Type: Ultrasonic Thickness Gauge
Request a Quote
The GE DMS 2 is the solution to your test problems dealing with corrosion inspections- even, and especially when it comes to handling demanding and critical test tasks – for example on coated components or at high temperatures.
The DMS 2’s straight-forward display shows you all measurement details at a glance. The echo display (A-scan) helps you to have your measurements under better control and to avoid material-related errors in measurement – due to cracks or inhomogeneities – as you are able to reliably distinguish them from the actual measured values.
The user-friendly data recorder provides extensive documentation capabilities that meet all the test requirements in the field.
To improve the reliability of your tests and to offer you greater ease in testing,GE Inspection Technologies have equipped the DMS 2 with state-of-the-art technology and special features.
Technical Specifications
| Automatic Probe Recognition | Recognizes all dialog probes for optimal instrument setup and performance, and for documentation purposes |
| Single-Element Mode | Enhanced mode for connection of multiple probes, including precision thickness measurements |
| Probe Zero Adjustment | Automatic or manual zeroing by pressing a key after coupling to the zero block |
| Minimum-Capture Mode | Increased pulse repetition frequency for displaying and storing the minimum reading |
| RF Display Mode | Four automatic band-passes, selectable display update rate, and more |
| Operating Principle | Ultrasonic pulse-echo method |
| Meausring Range | DMS 2E: 0.025 to 25.00 in (0.6 mm to 635 mm); DMS 2 and DMS 2TC: 0.008 to 25.00 in (0.2 mm to 635 mm) in steel |
| Operating Frequency | 32 Hz in MIN-Capture mode and B-scan display mode; 4 Hz or 8 Hz (selectable) in standard setup |
| Gain Control | Automatic or manual in 1 dB steps |
| Receiver Bandwidth | 0.5 to 15 MHz |
| Power Supply | 4 AA batteries (AlMn or NiMH) |
| Operating Time | Min. 40 hours with NiMH batteries (backlight on, operating at 4 Hz) |
| Operating Temperature | +10 °F to +120 °F (-10 °C to +50 °C) |
| Keypad | Dust and watertight sealed membrane keypad |
| Housing/Battery Compartment | Impact-resistant, dust- and splash-proof, gasket-sealed, IP54-rated |
| Display | Transflective LCD, 71 mm x 95 mm, 240 x 320 pixels, switchable backlight, adjustable contrast |
| Digit Display | 4-digit display, large digit height |
| File Formats | 8 file formats (3 with the DMS 2E), configurable later |
| Mircogrid Feature | Subsequent insertion of 2×2 to 9×9 grid per measuring point; 1 to 16 grids supported |
© MFE Inspection Solutions Inc. 2024
English 
English (Canada) 
Français du Canada